102
NOTE: You can further adjust the camera's image quality through the
Preview window under Web Configuration Utility. Please refer to Web
Configuration section for further details.
WARNING: Direct exposure to sunlight may cause permanent damage to the
CMOS sensor. Therefore do not expose the camera’s lens directly to
sunlight. When operation is required in glaring light environment, it is
recommended to use an iris lens.
The camera is designed for indoor usage and if your application requires
prolong exposure to sunlight, a sun visor is recommended to protect the
camera.
Replacing the Lens
Since the camera is designed with a CS- mount, the lens equipped
with the camera can be replaced with any standard C or CS lens
commonly used within the surveillance industry.
Follow the instructions below to replace the supplied lens with
any C or CS type lens.
1.
Unscrew the
camera’s
lens assembly.
2.
C-lens only, attach the new lens to a CS-C adapter
3.
Screw the new lens onto the
Internet Camera
. If appropriate,
adjust the iris according to the prevailing light conditions.
4.
Refer to
Adjusting the Camera Focus
on the previous page.
5.
Refresh the web browser and monitor the results from the
camera
.
Summary of Contents for IP301W - Network Camera
