User Manual
TEW-455APBO High Power Wireless Outdoor PoE Access Point
34
3.2.4 MAC Filter Setup
Continued from the
3.2.3.1 Virtual
AP
Overview
section, Click
Setup
button on the MAC Filter Setup column,
and then a Virtual AP MAC Filter setup page appears. The administrator can allow or reject clients to access
each Virtual AP.
MAC Filter Setup :
By default, it’s “
Disable
”. Options are
Disabled
,
Only
Deny List MAC
or
Only Allow List
MAC
. Click
Save
button to save your change.
Two ways to set the MAC filter rules:
Only Allow List MAC
.
The wireless clients in the ACL List will be
allowed
to access to Access Point; All others will be denied.
Only Deny List MAC
.
The wireless clients in the ACL List will be
denied
to access to Access Point; All others will be allowed.
MAC Address:
Enter MAC address (e.g. aa:bb:cc:00:00:0a) and click “
Add
” button, then the MAC address
should display in the ACL List.
There are a maximum of
20
clients allowed in this MAC Filter List. The MAC addresses of the wireless clients
can be added and removed to the list using the
Add
and
Delete
buttons
.
Click
Reboot
button to activate your changes
MAC Access Control is the weakest security approach.WPA or WPA2 security method is highly recommended.
