background image

T30

-4-

Power Supply

Before any maintenance work, isolate 

mains plug from power source.

The electric motor has been designed for one 

voltage only. Always check that the power 

supply corresponds to the voltage on the rating 

plate.

 

Machines marked for 230 volt can also be 

operated from a 220 volt supply.

Mains Plug Replacement

(UK & Ireland only)

Always check the condition of the cable and plug 

before starting with your work.
Should your mains plug need replacing and you 

are competent to do this, proceed as instructed 

below. If you are in doubt, contact an authorised 

Trend repair agent or a qualified electrician.

n

  Disconnect the plug from the supply.

n

  Cut off the plug and dispose of it safely; a plug 

with bared copper conductors is dangerous if 

engaged in a live socket outlet.

n

  Only fit 13 Amperes BS 1363A approved plugs 

fitted with a 13 Amp A.S.T.A approved  

BS 1362 fuse (1).

n

  The cable wire colours, or a letter, will be 

marked at the connection points of most 

good quality plugs. Attach the wires to their 

respective points in the plug (see below). 

Brown is for Live (L) (2) and Blue is for Neutral 

(N) (3) and Green/Yellow is for earth     (4) .

n

 Before replacing the top cover of the mains 

plug ensure that the cable restraint (4) is 

holding the outer sheath of the cable firmly 

and that the two leads are correctly fixed at the 

terminal screws.

For 115v units with a power exceeding 1500W, 

we recommend to fit a plug to BS4343 standard.

ELECTRICAL SAFETY

3
5

2

1

13 AMP

4

The vacuum cleaner is supplied from 

the factory with mains supply cable 

which has an earthed plug. It must 

only be connected to an approved 

earthed socket.

Never use a light socket. Never 

connect the live (L) or neutral (N) 

wires to the earth pin marked E or    .

Using an Extension Cable

If an extension cable is required, use an 

approved triple core extension cable suitable 

for the power input of this tool (see technical 

data). 

n

  When using a cable reel, always unwind the 

cable completely.

n

  Also refer to the table below.

Conductor size (mm

2

Cable rating (Amperes)

0.75 6

1.00 10

1.50 15

2.50 20

4.00 25

Cable length (m)

 

7.5 15  25  30  45  60

Voltage 

Amperes 

Cable rating (Amperes

115 

0 - 2.0 

6  6  6  6  6  10

 

2.1 - 3.4 

6  6  6  6  15  15

 

3.5 - 5.0 

6  6  10  15  20  20

 

5.1 - 7.0 

10  10  15  20  20  25

 

7.1 - 12.0 

15  15  20  25  25  -

 

12.1 - 20.0 

20  20  25  -  - 

-

230 

0 - 2.0 

6  6  6  6  6  6

 

2.1 - 3.4 

6  6  6  6  6  6

 

3.5 - 5.0 

6  6  6  6  10  15

 

5.1 - 7.0 

10  10  10  10  15  15

 

7.1 - 12.0 

15  15  15  15  20  20

 

12.1 - 20.0 

20  20  20  20  25  -

Summary of Contents for t30
















Reviews: