IQL13+/xxx Installation Instructions TG200383 Issue 3/B 19/08/04
2 - 3
Installation Instructions - Sheet 2
IQL13+/xxx
1 3 +
L
L A N
N I D
S t r a t e g y
: : : : :
O / S
S e r i a l N o
See LonWorks network management
tool manual. See IQ System LonWorks
Products Engineering Manual
(TE200292). LonWorks System
Integrator must have LonWorks
engineering expertise.
a). When installing IQL in LonWorks tool, press
service button when requested.
b). The IQL network image can be obtained from
www.lonmark.org, or from www.pnet.trend-
controls.com.
c). Set up bindings if required (bind network
variables between IQL and LonMark devices).
IQL13+ Data Sheet
TA200205 for Lon
network variables (NVs)
Install using LonWorks Network Manager Tool
4
If
a
binding IQLs to LonMark devices
or
b
LINCs version <3.23 straddle router
or
c
other devices have address conflicts with IQ System devices
or
d
LONROUTERs used on installed system
SRV PIN
service button
LINC
Lon
IQL
Lonmark
device
If one IQ System Lon device is installed, all must be installed.
2.2 Installation - Configuration
(continued)
Lon
LCI
IQL
Note that a PIN may be required to make
changes. If the PIN has been forgotten the
users should contact their supplier
(installers contact Technical Support) quoting the
generator number and neuron id (both from Address
module) whereupon a default PIN will be supplied.
This will only work for three attempts at entering the
PIN. After the default PIN is entered a new PIN
should be set up and remembered.
Lon
LCI
IQL
Connect software tool for commissioning
5
if required
Exercise I/O
6
If IqlTool2 available
IqlTool2 Manual TE200185
Use IqlTool2 to monitor inputs and exercise outputs
IqlTool2 Manual
TE200185
LCI Installation
Instructions TG200429
SET Manual TE200147
IqlTool2 (SET)
IqlTool2 runs within SETV5.1 (or later)
RS232 cable
supplied with LCI
Lon adapter cable
supplied with LCI
IqlTool2
(SET)
Note that IqlTool2 may also be used for mapping the
Lon segment, resolving duplicate addresses on Lon,
water balancing (/WR2, /WR4, /WT2, /WT4 only),
identification via service button, associating with SDU-
LON (for other uses see later)
