CNC/MINI/2
-1-
Dear Customer
Thank you for purchasing this Trend product,
we hope you enjoy many years of creative and
productive use.
Please remember to return your guarantee card
within 28 days of purchase.
Please read and follow all safety instructions
before turning on this engraver. If you do not
understand any statement, please contact Trend.
The data and information in this manual may be
subject to change without any prior notice.
Please keep the carton and packaging for further
servicing.
The Mini CNC is manufactured on behalf of
Trend by BravoProdigy.
This unit is supplied with two manuals provided
by BravoProdigy. Please refer to these
instruction manuals for full installation and
set up of the unit, and the standard software.
(1) BravoProdigy Model No. BE3030 CNC
Operating Instructions.
(2) BravoProdigy Model No. BE3030 EDIT
Operating Instructions.
PLEASE NOTE: EDIT & CNC software require a
PC running Windows XP, Windows Vista or
Windows 7 or 8.
TECHNICAL DATA
Voltage
UK & Eire 240V
Power output
DC 24V 6.5A
Machine size
925mm
597mm
633mm
Table size
450mm
440mm
Engraving area max.
300mm
300mm
100mm
Material thickness max. 100mm
Table load max.
5kg
Max. engraving speed 25-2500 mm/min
Resolution
0.02mm
Spindle speed
0-17,000 rpm
Collet size
1/4”, 4mm
Spindle motor
150W DC
Operating noise level
Stand by 39.6 dB
No load >66dB
Weight
54.5kg
Operating environment Temp 5-40ºC
Humidity 35-80%
Interface
USB 2.0
Fuse
UK & Eire 230V 13A in plug
INTENDED USE
The engraver is intended for engraving wood based
products and plastic.
The CNC Mini is a computer controlled engraver
which contains a user friendly software package and
easy-to-operate engraver.
This engraver is ideal for beginners who
wants to learn CNC or for schools & education
establishments.
The only requirement is a computer and a digital
photo to be engraved on wood or acrylic.
ITEMS REQUIRED
n
Workbench.
n
Hand tools.
%
If you require further safety advice,
technical information or spare parts,
please call Trend Technical Support or
visit www.trend-uk.com
CNC/MINI/2
-4-
Using an Extension Cable
n
If an extension cable is required, use an
approved triple core extension cable suitable
for the power input of this tool (see technical
data).
n
When using a cable reel, always unwind the
cable completely.
n
Also refer to the table below.
Conductor size
(mm
2
)
Cable rating
(Amperes)
0.75
6
1.00
10
1.50
15
2.50
20
4.00
25
Cable length (m)
7.5 15 25 30 45 60
230
0 - 2.0
6 6 6 6 6 6
2.1 - 3.4
6 6 6 6 6 6
3.5 - 5.0
6 6 6 6 10 15
5.1 - 7.0
10 10 10 10 15 15
7.1 - 12.0 15 15 15 15 20 20
12.1 - 20.0 20 20 20 20 25 -
Mains Plug Replacement
(UK & Ireland only)
Always check the condition of the cable and plug
before starting with your work.
Should your mains plug need replacing and you
are competent to do this, proceed as instructed
below. If you are in doubt, contact an authorised
Trend repair agent or a qualified electrician.
n
Disconnect the plug from the supply.
n
Cut off the plug and dispose of it safely;
a plug with bared copper conductors is
dangerous if engaged in a live socket outlet.
n
Only fit 13 Amperes BS 1363A approved
plugs fitted with a 13 Amp A.S.T.A approved
BS 1362 fuse (1).
n
The cable wire colours, or a letter, will be
marked at the connection points of most
good quality plugs. Attach the wires to their
respective points in the plug (see below).
Brown is for Live (L) (2) and Blue is for
Neutral (N) (3).
n
Before replacing the top cover of the mains
plug ensure that the cable restraint (4) is
holding the outer sheath of the cable firmly
and that the two leads are correctly fixed at
the terminal screws.
ELECTRICAL SAFETY
3
4
2
1
13 AMP
Power Supply
The electric motor has been designed for one
voltage only. Always check that the power
supply corresponds to the voltage on the rating
plate.
Machines marked for 230 volt can also be
operated from a 220 volt supply.
EC DECLARATION OF
CONFORMITY
Trend declare that this product mentioned
above is in compliance with 2006/42/EC.
This product also complies with Directives
2014/35/EU, 2014/30/EU, 2011/65/EU and the
following harmonised standards
EN 60204-1, EN 12100, EN 61000-3-2, EN
61000-3-3, EN 61000-6-2 and EN 61000-6-4.
Managing Director
Jeff Willcocks
CNC/MINI/2
Trend Machinery & Cutting Tools Ltd.
Unit 6 Odhams Trading Estate
St Albans Road, Watford
Herts, WD24 7TR
United Kingdom
30.8.2017
Never use a light socket. Never
connect the live (L) or neutral (N)
wires to the earth pin marked E or .
