14
PREPARATION FOR USEN
AIRPRO MAX
Battery installation and removal
Remove battery by pushing lightly on
the release area indicated.
Observing the orientation as shown in
Figure 5 install a fully charged battery
into the respirator until the battery fully
clicks into position.
Visual inspection of breathing zone
•
Check the face seal for damage.
•
Check the face seal engages properly into the frame. If the face seal cannot
be retained securely in the face shield frame, a new face seal must be fitted.
See section
on page 24.
•
Check the quick release headband is properly installed. Replace any
damaged parts including scratched or damaged face shield.
Figure 4
Figure 5
