Trend Micro™ Network VirusWall™ Enforcer 1500i Installment and Deployment Guide
2-8
To replace the bezel, hook the right end of the bezel onto the chassis, and then fit the
free end of the bezel onto the device. Secure the bezel with the keylock.
F
IGURE
2-5.
Installing and removing the bezel
To remove the bezel:
1.
Unlock the keylock at the left end of the bezel.
2.
Lift up the release latch next to the keylock.
3.
Rotate the left end of the bezel away from the front panel.
4.
Unhook the right end of the bezel and pull the bezel away from the device.
1
Release latch
2
Keylock
3
Bezel
4
Hinge tab
4
3
2
1
Summary of Contents for viruswall enforcer 1500i
