Install your TPS 440T and 2200T security devices
5
• Green: Indicates the system is on.
— System status
• Flashing green: Indicates the system is booting up, and is not yet ready to inspect traffic.
• Flashing green/yellow: Indicates the system is booting and BIOS is updating.
• Solid green: Indicates the system is running in a healthy state.
• Solid yellow: Indicates the system is running but has a health rating below the acceptable
threshold.
— Alert status
• Solid green: Indicates both the hardware and the software processes are running normally.
• Solid yellow: Indicates the system is booting. If the solid yellow indicator remains after
startup, a software problem has been detected. Hardware status is undefined.
• Flashing yellow: Indicates a hardware problem is detected. Software running normally.
• Off: Indicates the system power is off.
Step 8. Complete initial setup
From the console terminal, complete the initial configuration by using the setup wizard.
The wizard performs system checks, and then prompts you to complete the initial setup.
1. Specify a security level (None, Low, Medium, or High). The security level you select determines your
password complexity requirements.
2. Create an administrative account with the
SuperUser
role. The
SuperUser
role gives the account
full access to the device. For more information about user accounts, review the documentation for
your product on the TMC.
The wizard prompts you to log in with your administrative account so you can continue initial setup.
3. From the console terminal, log in with your administrative account.
The wizard prompts you to configure IP address, default gateway, DNS server, and timekeeping
options.
