Trend Micro TippingPoint NX-Platform Hardware Installation And Safety Download Page 57 | Manualshive

Page: 57 / 65

background image

NX-Platform Hardware Installation and Safety

51

Installing the power cord retention bracket

This topic provides links to topics with installation instructions for the power cord retention bracket.
The following subjects are discussed:
•

Power cord retention bracket

on page 51

•

Installing and using the bracket

on page 51

•

Removing the bracket

on page 53

Power cord retention bracket

Provides a description and image of the power cord retention bracket.
The power cord retention bracket (part number 5066-1202) helps reduce strain on the power cord and

power supply outlets.

Figure 15. Power cord retention bracket

Installing and using the bracket

Shows an NX-Platform IPS with the power cord retention bracket installed.
The following figure shows an NX-Platform IPS with the power cord retention bracket installed:

«
...
55
56
57
58
59
...
»

Summary of Contents for TippingPoint NX-Platform


































































Reviews:

No comments

Related manuals for TippingPoint NX-Platform

Brand: PaloAlto Networks Pages: 36

Brand: ZyXEL Communications Pages: 2

Brand: ZyXEL Communications Pages: 2

Brand: Mackie Pages: 28

Sourcefire 3D System

Brand: Source fire Pages: 280

SURFboard SVG2500

Brand: Motorola Pages: 32

Brand: Barracuda Pages: 6

Brand: Futurex Pages: 31

Vigor 2862 Series

Brand: Draytek Pages: 18

Brand: Draytek Pages: 21

VIGOR2820 series

Brand: Draytek Pages: 269

Vigor IPPBX 2820n

Brand: Draytek Pages: 378

Brand: Alcatel-Lucent Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands