Trend Micro TippingPoint NX-Platform Hardware Installation And Safety Download Page 52 | Manualshive

Page: 52 / 65

background image

46

NX-Platform Hardware Installation and Safety

Power supply and fan modules

This topic provides links to installation instructions for power supply modules and fans.
The following subjects are discussed.
•

NX-Platform AC power supply

on page 46

•

NX-Platform DC power supply

on page 47

•

NX-Platform fans

on page 49

Warning!

This product might have more than one power supply source. All power sources must be

removed to de-energize the unit.

Note:

This product has serviceable modules and hot-swappable power supplies. It has no other serviceable

parts inside.

NX-Platform AC power supply

Describes how to install the AC power supply.
The NX-Platform device includes two power supply modules. The modules are hot-pluggable, redundant,

and current-sharing, and the device can run with one active module.

Figure 12. NX-platform AC power supply

«
...
50
51
52
53
54
...
»

Summary of Contents for TippingPoint NX-Platform


































































Reviews:

No comments

Related manuals for TippingPoint NX-Platform

Brand: Fortinet Pages: 12

Brand: Sophos Pages: 2

Brand: Sophos Pages: 4

Brand: Sophos Pages: 2

Brand: Sophos Pages: 8

Brand: Sophos Pages: 9

Brand: Sophos Pages: 15

Brand: Sophos Pages: 14

Brand: Sophos Pages: 28

Brand: Sophos Pages: 32

Brand: Sophos Pages: 65

FortiGate 2600F Series

Brand: Fortinet Pages: 13

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands