Trelawny A22, Operation And Maintenance Manual

Page: 15 / 16

PARTS LIST - ELECTRIC MOTOR
This tool has been designed and produced in accordance with the following directives:
·
2006/42/CE Machine directive
· 2004/108/CE Electromagnetic compatibility directive
· 2006/95/CE Low-voltage directive
If your company has any problem with our products or would like to discuss the possibility of an improvement being made to them, then
please do not hesitate to contact us. Your comments are both important and appreciated.
All rights reserved. Any unauthorised use or copying of the contents or part thereof is prohibited.
This applies to trademarks, model denominations, part numbers and drawings.
Use only genuine Trelawny spares.
The use of non-Trelawny spare parts invalidates the warranty.
ITEM No PART NUMBER DESCRIPTION
1 303.5100 Cover with Cable Support
2 303.5290 Cover Noise Supressing Material
3 303.5535 Cooling Ring (2 x required)
4 303.5180 Cable Clamp
5
303.5195 Cable Retaining Nut
6 303.5225 230v Power Supply Cable
303.5137 110v Power Supply Cable
7
303.5135 Black Cable Fastener
8
303.5117 Cover
9 303.5190 Red Light Switch (2 x required)
10 303.5245 Chrome Retaining Nut (2 x required)
11 303.5170 Yellow Light
12 303.5165 Green Light
13 303.5330 Side Cover Noise Suppressing Material
14 303.5315 Cover Noise Suppressing
15 303.7575 110v PU Pipe
303.5215 230v Nylon Pipe
16 303.5260 Black Cable
17 303.5175 Pressure Sensor
18 303.5335 Motor Fastener Suppressing Material
19 303.5115 Motor Mounting Plate
20 303.5320 Motor Fastener Noise Suppression Material (2 x required)
21 303.5300 Gasket (4 x required)
22 303.5288 110v 50/60Hz By-Pass Motor (2 x required)
303.5285 230v 50/60Hz 1150watt By-Pass Motor (2 x required)
23
303.5340 Motor Fastener Side Cover Noise Suppressing Material (2 x required)
24 303.5520 Bottom Plate Valve (2 x required)
25
303.5525 Motor Bottom Plate (Galvanized) (2 x required)
26 303.5350 By-Pass Motor Bottom Plate Gasket
27
303.5160 Swivel Elbow (Push-in fitting)
28 303.5580 M/F Extension
29 303.5515 Single Phase Motor Head Spacer (4 x required)
30 303.5325 Base Plate Noise Suppression Material (2 x required)
31 303.5110 Vacuum Base Plate
32 303.5310 Base Plate Gasket
33 303.5400 17mm Hexagonal Nut
34 303.5560 Motor Head Spacer (Cover) (4 x required)
35 303.5247 110v Single Phase 2 x Motors Head Wiring Kit
303.5205 230v Single Phase 2 x Motors Head Wiring Kit
36 303.5150 Fuse Cover (4 x required)
37 303.5233 110v Vacuum 15amp Fuse (4 x required)
303.5145 230v Vacuum 10amp Fuse (4 x required)
38 303.5230 Fuse Holder (4 x required)