EN
4
D) Status-LED, bicolor
E) ON/OFF switch
F) Microfone
G) Suction cup with tab
H) Micro-USB charging socket
7) Charging SoundBall 2in1
Connect the micro-USB charging cable with the micro-USB charging socket (H) on the
SoundBall 2in1 and with a PC or a USB adapter for the power outlet. While charging, the LED is
red. Once the device is fully charged, the red LED turns off.
i
If the battery becomes low, the red LED lights up every 4 seconds, and a warning signal sounds.
Charge SoundBall 2in1 as described above.
i
The maximum battery life becomes available after about 10 charge cycles.
8) Turning on SoundBall 2in1
Press the ON/OFF switch (A) for 4 seconds until an ascending tone sounds. SoundBall 2in1
is now on and in standby mode. The Bluetooth® function is now active and the status LED
flashes white rapidly.
9) Pairing SoundBall 2in1 with a Bluetooth® device.
a) Place the SoundBall 2in1 about one meter away from your device.
b) Turn the SoundBall 2in1 on (see 8).
c) Enable the Bluetooth® function on your device. For more information, please refer to your
device's user manual.
d) If necessary, set up your device's visibility to other Bluetooth® devices.
e) Enable your device to search for other active Bluetooth® devices in the vicinity.
f ) Select "Sound Ball" from the list of available Bluetooth® devices on your device, and pair
your device with the SoundBall 2in1.
g) Once the device and the SoundBall 2in1 are paired, you will hear a short beep and the
LED will flash white every 2 seconds..
i
When using Bluetooth®, ensure that the distance between the SoundBall 2in1 and the paired
device is not more than 10m.
i
You can break the connection by either disabling the Bluetooth® function of your device, or by
turning off the SoundBall 2in1.
10) Broadcasting music via SoundBall 2in1
a) Turn on the SoundBall 2in1 (see 8) and connect the SoundBall 2in1 to your device (see 9).
