2022 Carbon Rail 9.8 and 9.9
6
Adjust the geometry
Flip the Mino link in the seatstay pivot to change the bike’s geometry to fit your riding style or the terrain.
Notice:
If using a 29" wheel up front and a 27.5" wheel in the back, the minolink must be in the high position.
Steeper head tube angle
Slacker head tube angle
0.5°
Mino link in the high position
Mino link in the low position
•
Pulls in the front fork for quicker steering
•
Raises the bottom bracket for improved climbing
•
Pushes the head tube angle back 0.5° and pushes out
the front fork for slower steering that is more stable at
high speed
•
Lowers the bottom bracket up to 9mm for more stability
Tools
•
5mm hex tool
1.
With the bike on the ground, loosen and remove one mino link chip.
2.
Loosen and remove the other mino link chip.
3.
Position the bike:
Mino link high:
Lift the bike by the seat tube. This will pull the rear triangle up and forward.
Mino link low:
With the chips removed, gravity will pull the rear triangle down and back.
4.
Place one mino link chip into the desired position. Slightly tighten the mino link bolt.
5.
Install the other mino link chip into the same position. Slightly tighten the mino link bolt.
6.
Torque both mino link bolts to 17Nm.
