Operating manual OPTIMAL Control Eco (2112)
14
Breddningsving
en monteras på
insidan av
maskinen
Setting the spreading width
•
User interface
The setting is undertaken in the activation of the specified toggle switch on the right
side of the handset. Each time you press up / down toggle switch the spreading width
is regulated. Held toggle switch up / down the spreading width is regulated as long as
the toggle switch is held in position.
•
Conditions
▪
Setting the spreading width can not be undertaken when the menu setting is
enabled
.
▪
When the upper / lower limit of the spread rate is reached, a sound alarm is
given (single beep) for each additional print and values will remain at the set
level
.
Emptying function
•
Description
The function starts and carry on emptying of the container remaining content
.
•
User interface
Activation of emptying function is done via the user menu. When activated, the LED
flashes.
The function is deactivated by pressing buttons ESC or MENU
•
Conditions
▪
Emptying function can only be activated when dosing is stopped:
Start/stop switch in p
osition ”stop”.