treesse minipool Quarz, Operating And Maintenance Manual

Page: 70 / 100

70
EN
minipool
Q
uarz
VIEWING AND SETTING THE TIME
Make sure you have set the time of day.
Setting the time-of-day can be important to determine
filtration times and other secondary features.
When in the TIME menu, SET TIME will flash on the display
if no time-of-day is set in the memory.
24-hour time display can be set under the PREF menu.
To next item
in Main Menu
Press Menu/Select
repeatedly until
TIME appears.
Main Screen
Main Screen
A few seconds
Set
Main Screen
*****
Wait a few
seconds to return
to the original setting
If the time of day is not set, “SET TIME” will be displayed instead of
just TIME.
Key
+
-
Indicates a change in the display.
Indicates a continuous or intermittent message - every 1/2 second.
A temperature button, used for “Action”
Menu/Select button
Waiting time that keeps the last change to a menu item.
Wait time in which the initial settings are restored
by cancelling the changes made.
Note:
This note refers to systems that do not keep track of
Time-of-Day when powered down.
If power to such a system is interrupted, Time-of-Day is
not stored. The system will still operate and all other user
settings will be stored. If filter cycles are required to run
at a particular time of day, resetting the clock will return
the filter times to the actual programmed periods.
When such a system starts up, it defaults to 12:00 Noon,
so another way to get filter times back to normal is to
start the spa up at noon. SET TIME will still flash in the
TIME Menu until the time is actually set, but since the spa
started at noon, the filter cycles will run as programmed.
DISPLAY INVERSION
a few seconds
or
Toggles the inversion of the segmented characters
Pressing the Menu/Select button will return to the Main Screen.
Press Menu/Select
repeatedly until
FLIP appears.
Main Screen
Main Screen
To next item
in Main Menu
If not pressed
F F
Note:
Some panels can be equipped with a button (FLIP) that
allows you to invert the display.
The FLIP function depends on the configuration chosen
by the manufacturer and may not be available.
Use