17
Fusion SKI
bathtub
EN
First run
HOW TO ACTIVATE FUNCTIONS
SHOWER HEAD
HOUSING
Pressing the “
shower head
” key makes water come out of
the shower head. The water continues to flow until the key
is pressed again or for a maximum of
20 minutes
.
While the water continues the "
shower head
" icon is red.
The function can only be activated with the shower head
extracted from its housing: the figure above shows how to
do this.
WHIRLPOOL
Pressing the “
Whirlpool
” key activates the whirlpool
function. The function remains active until the key is
pressed again or for a maximum of
20 minutes
.
When the whirlpool is running the key is red.
If the whirlpool is started but the water level in the minipool
is too low, the key will flash red three times and the whirlpool
will not start.
TURNING ON
LIGHTS
Pressing the “
Lights
” key activates the LEDs in
white light
mode. The function remains active until the key is pressed
again or for a maximum of
60 minutes
. When the light is on
the key is red.
The function can always be activated, even if the water level
is low.
TURNING ON
CHROMATHERAPY
With every quick press of the “
Chromatherapy
” key the colour
changes, moving through the 15 available. Choose the one
that is best suited to your needs.
A long press (at least four seconds) of the “
Chromatherapy
” key
activates a sequence of 15 colours that change automatically.
The function can always be activated, even if the water level
is low.
