2.
Choose a program by pressing the Program button, press it continuously to switch through
the programs, the program number will be shown on the No. indicator.
3.
Check the settings of the four subsections. Press the Subsection button to check the
temperature and time for each subsection.
4.
Press the On/Off button to start the furnace, the Power indicator will be on. The furnace
works according to the program chosen, start from the 1st Subsection to the 4th Subsection.
When the four subsections are finished, all of the four indicators and the Finish indicator
will be on, and a beep sound will be heard. Press the On/Off button to stop the furnace.
When the process is finished, take out the work-piece. If the work-piece is not taken out and
the On/Off button is not pressed (the indicators are on), the furnace will remain working in
the temperature of the 4th Subsection (the furnace will automatically heat if the temperature
drops). To stop the furnace, press On/Off button.
5.
Set Program 6: Press the Set button to begin setting.
Press Subsection button to choose a heating subsection.
Press Select button to choose the temperature and time for the subsection.
Press On/Off button to increase the numbers.
Press Timing Work button to decrease the numbers.
The temperature range is from 0
℃
to 1,000
℃
(the temperature increases by 50
℃
each time
the button is pressed.
The time range is from 1 minute to 30 minutes (the time increases by 5 minutes each time
the button is pressed.
Only Program 6 is stored into the memory of the furnace, other program settings will return
to default setting after the furnace is turned off.
6.
Timing Work: Press the Timing Work button to start the furnace under the time delay mode.
The last two digits of the temperature indicator indicates hour, the Time indicator indicates
minute and second.
The timer starts to count down, when it indicates 0, the furnace starts working
automatically.
When the furnace is in the time delay mode, the time can be set at any time.
Use Select button to choose hour and minute.
Press On/Off button to change the settings continuously.
Time range: Hour: 0-24 hours, Minute: 0-30 minutes.
Cautions:
1. Please read this user manual carefully before operating.
2. The furnace can be connected to 220V, 50Hz power supplies, it should have a safe grounding,
the diameter of the wire should be compatible with this furnace, and the maximum power
should not exceed 40kW.
3. Please leave a gap of 20cm on the two sides for better cooling.
4. Change the fuse sockets according to the requirements.
