INSECT PHEROMONE & KAIROMONE SYSTEMS
Your Edge – And Ours – Is Knowledge.
1
1
2
3
C
B
STKY trap
A
Twist ties
1.
Remove release liner from both sides of the STKY trap.
3.
Insert the twist tie into one of the holes of the BMSB lure then through the
GSB lure. Next, bend the BMSB lure to align the second hole and insert twist
tie. Twist the twist tie to keep them tight together.
2.
Attach STKY trap to stake with clip as shown.
4.
Make a loop with ends of the twist tie and hang on the binder clip on the
other side of the stake as shown.
NOTE: In order to prevent reduction in pheromone release rate, do not press
the lures onto the adhesive.
Visit our website: www.trece.com or call 1-866-785-1313
Please see Trécé’s IPM Partner® Guidelines for further instructions.
Materials Needed:
A.
(3) Twist ties
B.
STKY™ Dual Panel Adhesive Trap
C.
PHEROCON® BMSB and GSB lures
D.
Flat wooden stake and
binder clip (not included)
© 2018, Trécé Inc., Adair, OK USA • TRECE, PHEROCON, STORGARD, CIDETRAK and IPM PARTNER are registered trademarks of Trece, Inc., Adair, OK USA
TRE-1238, 05-18
4
D
NOT INCLUDED
Flat wooden stake with hole near
the top and binder clip
(See other side for instructions
for tree branch assembly)
Dual Panel Adhesive Trap Installation Instructions: For Ground Stake
T R A P
SWD
BMSB STKY
™
For: Brown Marmorated Stink Bug (BMSB), Halyomorpha halys, and Other Stink Bugs
Green Stink Bug(GSB), Acrosternum hilare, Brown-winged Green Bug, Plauti stali,
and Other Stink Bugs
GSB Lure
Front of the trap
Back of the trap
BMSB Lure
STORAGE RECOMMENDATION:
Store in a COLD environment.
