8
THE PRODUCT
Thoroughly clean the parts that will come into contact with food before you use the appliance for the
first time (see chapter ‘Cleaning’).
Parts
1.
Motor unit
2.
Lid
3.
Double blade unit
4.
Chopper bowl
5.
Anti slip feet
6.
Bottle cap
7.
Drinking cup
8.
Blade base
9. Push button
Using the appliance as a chopper function
1.
Place the blade unit onto the pin in the center of the bowl.
2.
Put the ingredients in the bowl.
See the table below for the recommended quantities and processing times. You will achieve the best
results if you stick to the quantities and processing times in the table.
-
Pork & meat : Max. 200 g
When prepare the food such as Pork, meat, steak etc. the max. quantity of the mixture is 100g. The
operation time is max. 30s and the rest periods is 1min of each use. Then let the appliance cool down
to the room temperature.
3.
Put the lid on the bowl.
4.
Place the motor unit on the lid.
Make sure that the positioning on the lid and on the motor unit are clicking in a fasten position.
5.
Press the middle button to start the chopping process.
When chopping soft ingredients (e.g. onions, parsley or lean beef), we advise you to press the motor
unit briefly several times.
Using the appliance as a blender function
1.
Place the bottle (drink cup) on a flat surface , open the bottle.
2.
Fill the bottle with your favorite ingredients, all the ingredient must be filled below the bottle
max. level mark.
3.
Fasten the blade base on the open end of the bottle.
4.
Turn the bottle upside down, put the bottle and blade base together on the blender base, ensure
the three micro switch block is in the right position.
5.
Press the middle button to start the machine, release your finger and the machine will stop.
6.
Unlock the bottle from the base.
7.
Turn the bottle over and place on a flat surface, take out the blade base, put the drinking lid on.
