SETTING UP YOUR TREBLAB xRun
Turn ON
Press and hold the
POWER
button for 1 second. You will
hear a “Power ON” voice prompt, and the blue & red LED
light will start flashing.
Turn OFF
Press and hold the
POWER
button for 3 seconds. You will
hear a “Power OFF” voice prompt, and the flashing blue
LED light will go off.
PAIRING
Make sure
TREBLAB xRun
is fully charged and turned
OFF.
When you turn the earbuds ON, they will try to reconnect
with the most-recently connected device. If reconnection
does not happen automatically, the earbuds will try to find
the next device in the pairing list.
1.
Press and hold the
POWER
button on the right earbud for 1
second. You will hear the “Power ON” voice prompt, and
“PAIRING” a few seconds later (
LED
will flash red and blue
rapidly). Release your finger.
2.
Activate the wireless connection option on your smart
device and keep it within 3 feet / 1 meter while pairing.
3.
Using your smart device, scan/search for available devices.
4.
Select
TREBLAB xRun
from the device list.
5.
If prompted for the password, enter “0000”.
6.
Once
xRun
is successfully paired and connected, you will
hear a “CONNECTED” voice prompt, and the
LED
will start
flashing blue every 5 seconds.
