RESTORE FACTORY SETTINGS
To restore the earphones back to the factory settings:
Power on
XR800
Press and hold the
and the
POWER
button
for 5 seconds until you hear the double-beep sound and
“Your headset is disconnected” voice prompt. The blue
LED will light up
Now the earphones are restored back to the factory
settings and ready to be paired again.
1.
2.
3.
SAFETY RULES
Don’t disassemble or modify your earbuds for any
reason. Doing this may cause the earbuds to malfunction or
become combustible. The damage to your device can void
the manufacturer’s warranty.
Make sure the headset is completely dry before charging.
Charging a wet device may cause serious damage.
Clean only with a dry cloth.
Avoid exposing
TREBLAB XR800
to extreme
temperatures (below 37°F / 3°C or above 112°F / 45°C). Extreme
temperatures can cause deformation of
XR800
components
and reduce battery life and the lifespan of your headset.
Don’t put the device's LED lights close to humans’ or
animals’ eyes.
Do not use
XR800
during a thunderstorm.
Thunderstorms can cause serious malfunction and increase
the risk of electric shock.
