Treasure Locator Centurion 21, Instruction Manual

Page: 2 / 7

Treasure Locator Digital C-21x Instructions Manual
1
Introduction
The
Treasure Locator Centurion 21 is a digital instrument based on a microprocessor, working at 10MHz, very flexible in
its use due to the larger quantity of operational features. The Treasure Locator Centurion 21 is constructed as a precise
and robust instrument.
.
Controls
1
2 3
The controls of the
Treasure Locator Centurion 21 are made up of information zones and command zones.
Turn on your
Treasure Locator Centurion 21 with: POWER (1).
Selecting your own settings:
Pressing
MENU(2) you’ll be able to select the following settings:
1. ELEMENT: Select the metal/mineral to locate. ( GOLD, DIAMOND, SILVER )
2. MILES: Select distance to locate (1.2; 0.6; 0.3) written in miles.
•
From 0 to 0,3 miles (0 up to 500 mts.)
This setting is used to search in small areas, inside a house or with small close targets.
•
From 0 to 0,6 miles (0 up to 1 km)
This setting is used for both, close targets or larger ones at longer distances. More sensitive to larger and closer
objects than the previous setting. Not recommended to be used inside a house.
•
From 0 to 1,2 miles (0 up to 2 km)
This powerful setting it’s recommended for large targets at longer distances. This position is not recommended
for targets at closer distances
.
3. SENSITIVITY : Select the sensitivity that you wish to give the locator.
( VERY HIGH, HIGH, MEDIUM,LOW VERY LOW)
4. SOUND : Select the audio level.( BUZZER=low; BUZZER HIGH=high ; SILENT= no audio)
OPERATING:
Turn on your locator with the POWER (1) pad. After 5’’ the locator is activated in search mode with the last setting that has
been left in its memory since last time “turned off “.
MENU CONTROL INSTRUCTIONS:
For custom settings proceed as follow:
1. Press MENU .
2. With Arrows (3) select the setting: ELEMENT, MILES, SOUND, SENSITIVITY.
3. Once one of the settings is selected press MENU again (the setting will appears in [])-Meanwhile the setting is in []
you’ll be able to make your selection using the arrows. After 8’’ of not changing a setting, the locator returns
automatically to search mode.
4. For the locator to return to search mode manually; when your selection of settings is
finished, press the Arrows up
to [QUIT] option, when appears than press MENU.
To turn Off, press “ Power ”.