STEP
1
CHARGING
• Remove protective cap from charging/USB port and connect the power supply to the
EVO charging port, then plug the other end into any 110V power source. The EVO is
fully charged when the red Bluetooth indicator lights turn off (approximately 3 hours).
Note:
• Charge EVO in dry area to keep from damaging.
• Top unit must be installed on bottom unit correctly to charge. Make sure buttons on top
unit and bottom unit align prior to connection power supply.
• We recommend fully charging EVO before you store for extended periods of time.
STEP
2
PAIRING BLUETOOTH DEVICE
• To turn on Bluetooth, locate the Bluetooth power button on the top unit of the EVO. Press
and hold Bluetooth power button for 3 seconds until you hear a prompt sound. The
Bluetooth indicator light will blink white when in pairing mode.
• From your music device, turn on Bluetooth and switch your device to discovery mode.
Select “EVO” from your device options. You will hear a set tone and the Bluetooth light
will become solid white once the EVO and your music device are paired successfully.
• To turn on bass speaker, locate the Bluetooth power button on bottom unit. Press and
hold Bluetooth power button for 3 seconds until you hear a prompt sound. The Bluetooth
2
5
Note:
• Sound quality will lessen or music
will stop playing when music device
is approximately 30 feet away from
EVO.
Top Unit
Bluetooth Power
Button
Bottom Unit
Bluetooth Power
Button
STEP
8
USB PORT
• To charge electronic devices, remove protective cap from charging/USB port. Insert
USB cable into USB port located on back of bottom unit. Reattach protective cap when
not in use.
Note:
• If using USB port and lights, battery life will reduce to 4 hours.
STEP
7
TABLE LIGHT
• With the top unit removed, press down adapter rod until rod locks into place.
indicator light will blink white first,
followed by a set tone, and then
become solid white. Your music
device and EVO top and bottom unit
are now paired successfully.
• Use controls on music device to
select songs from playlists and
adjust volume.
