Treasure Garden Cantilever AKZ13, Assembly And Operation Manual, Page: 10 / 12

2 9
REQUIRED FOR ASSEMBLY:
• 400 lbs. playground sand (not included).
S A F E T Y P R E C A U T I O N S :
• Close the umbrella in windy conditions or when a storm approaches.
Never allow the umbrella to flap in the wind; this could damage the canopy.
• Do not leave open umbrella unattended. If damage occurs, this is not covered
by the warranty.
• When adjusting the umbrella, make sure that no person(s) or item(s) are close to the
umbrella. This is important to prevent injury or material damage.
C A R E A N D M A I N T E N A N C E :
• When not in use, close and cover umbrella with a protective cover.
• If necessary, clean the fabric with lukewarm water, mild detergent, and a sponge.
• Allow a wet canopy to dry slightly opened, but do not leave unattended.
• Wipe sliding marks on the aluminum poles with a damp cloth.
Winter Storage:
• Store in a dry place.
• Any visible defects must be repaired by a professional.
After the Winter:
• Areas subject to turning and sliding can be treated with a non-staining lubricant spray
(silicone-based).
• Check the condition and function of the umbrella. Any defects must be repaired by a
professional.
CAUTION: Fully assembled, the AKZ13 umbrella weighs over 500 lbs.
Moving the umbrella fully assembled will increase the risk of damage to your umbrella
and/or can cause serious injury.
We recommend a two-person team for assembly
and disassembly.
IMPORTANT:
Prior to assembly it is important to decide on the location of the AKZ13
umbrella. The umbrella measures approximately 10 ft. in height and 13 ft. in width.
• Allow ample height to avoid damage to your umbrella during assembly and usage.
• Choose a location that is level and sturdy.
• Avoid any sloping or soft ground.
• Consider a location that will maximize the umbrella’s rotating swivel function. Placing
the AKZ13 between two entertaining areas is ideal.
NOTE: Some parts may be included in the styrofoam packaging.
DO NOT discard any packaging or box until assembly is complete.
1 Base Cover 1
2 Steel Base Frame 1
3 A dd -On Weight Containers 4
4 Feet 4
5 Screws 4
6 Wrench 1
7 Bolts 5
8 Washers 5
9 Me d ium Hexagon Wrench 1
10 P laygroun d San d (not inclu d e d ) 400 lbs .
11 AK Z 13 Main Frame 1
12 L arge Hexagon Wrench 1
13 Crank L ift Han d le 1
14 Small Hexagon Wrench 1
AKZ13 PART LIST
P art Descri p tion Qty .