2
9
Collar (1)
Clamp (1)
Stem (1)
Bolts (2)
Hexagon
Wrench (1)
Steel Wrench (1)
Protective Cover (1)
Base Shell Base Lid
A
C
B
I
E
G
F
J
P
H
M
K
N
L
O
D
Q
R
Spring Loaded
Rib End Cap (8)
A
- Base Shell and Base Lid
J
- Double Wind Vent Canopy
B
- Collar Base Stem
K
- Removable Crank Handle
C
- Main Frame
L
- Socket A -
To open and extend arm
D
- Housing
M
- Socket B -
To open canopy
E
- Outer Frame Arm
N
- Crank Handle Storage
F
- Arm Connector
O
- Light Adapter
G
- Inner Frame Arm
P
- Spring Loaded Rib End Cap
H
- Bottom Pole
Q
- Locking Rotation Knob
I
- Gemel Hinge
R
- Valance (optional)
REQUIRED FOR ASSEMBLY:
• 200 lbs. of playground sand or all purpose sand (not included).
NOTE:
Avoid allowing sand into the center of the base shell.
S A F E T Y P R E C A U T I O N S :
• Close the umbrella in windy conditions or when a storm approaches.
Never allow the umbrella to flap in the wind; this could damage the canopy.
• Do not leave open umbrella unattended. If damage occurs, this is not covered
by the warranty.
• When adjusting the umbrella, make sure that no person(s) or item(s) are close to the
umbrella. This is important to prevent injury or material damage.
C A R E A N D M A I N T E N A N C E :
• When not in use, close and cover umbrella with a protective cover (included).
• Allow a wet canopy to dry in open position.
• If necessary, clean the fabric with lukewarm water, mild detergent, and a sponge.
• Wipe sliding marks on the aluminum poles with a damp cloth.
Winter Storage:
• Store in a dry, protected place.
After the Winter:
• Areas subject to turning and sliding can be treated with a non-staining lubricant spray
(silicone-based).
• Check the condition and function of the umbrella. Any defects must be repaired by a
professional.
CAUTION:
Fully assembled, the AG28 umbrella weighs
over 300 lbs.
Moving the
umbrella fully assembled will increase the risk of damage to your umbrella and can
cause serious injury.
We recommend a two-person team to assemble or disassemble
the umbrella.
AG28 CHECKLIST
