2
5
(Fig. 1)
NOTE: REFER TO SEPARATE BASE-13, BASE-AKZ OR MOUNT KIT MANUAL
FOR BASE/MOUNT ASSEMBLY PRIOR TO PROCEEDING.
S T E P 4
360° Rotating Hub Swivel
Place your foot on the foot pedal of the rotating hub and
step-on
the pedal to release
rotating lock (Fig. 10). Place hands on the main frame and rotate the umbrella frame in
either direction, in 90° increments. To lock position, step off the foot pedal to engage
rotating lock.
Foot Pedal
Main Frame
Rotating Hub
360
(Fig. 10)
S T E P 5
Closing Canopy
Insert crank handle into “Open/Close” socket in crank mechanism (Fig. 11). Turn crank
handle counter clockwise until the canopy is closed (Fig. 12). Turn adjustment
knob counter clockwise and slide downward until umbrella is in closed position.
Tie string around canopy to secure canopy. Cover umbrella with provided protective cover
when not in use (Fig. 13).
S T E P 1
Umbrella Assembly
Two-persons recommended for team lift and to complete assembly.
With base cover in place or mount kit installed, lift umbrella up and insert the main frame
onto the installed rotating hub (Fig. 1). Secure umbrella into place by inserting the (2) bolts
and (2) washers and tighten using 6mm hexagon wrench provided (Fig. 2).
REMOVE ALL PLASTIC PACKAGING MATERIAL FROM ALL PARTS PRIOR TO
OPENING UMBRELLA. CHECK UNDER CANOPY FOR PACKAGING AROUND RIBS.
Your umbrella is now ready to operate!
(Fig. 2)
Cl
Ope
n
Righ
t L
eft
Open
Ma
x
0˚
Ma
x
(Fig. 11)
(Fig. 12)
(Fig. 13)
