Limited Warranty
What does this warranty cover?
Treasure Products warrants that its products are free
from defects in material and workmanship under
normal use for a period of one (1) year from the date
of purchase. Warranty extends only to original
purchaser and is not transferable.
What is not covered by this warranty?
This warranty does not cover any accessories, or any
consumables, as to which there shall be no warranty
or replacement. This warranty does not cover
conditions or damages caused by accidents,
alterations or misuse. In addition, damage due to
normal wear and tear is not covered by this warranty.
What is needed to keep the warranty in service?
You must provide proof of purchase as a condition of
receiving warranty service. Your dated sales receipt,
showing the date of purchase of your product is your
proof of the purchase date.
What will be done to correct the problem?
Treasure Products will repair or replace, at Treasure
Products’ sole discretion, any defective,
nonconforming, or malfunctioning product or any
component thereof.
How do you get service?
If you require warranty service, contact Treasure
Products prior to sending your product in for service.
You can find contact information on our website at
www.treasureproducts.com > support > contact.
This limited warranty gives you specific legal rights,
and you may also have other rights which vary from
state to state.
• • •
© 2002-2020 Treasure Products Inc.
All rights reserved. Made in USA.
Designed and manufactured by Treasure Products.
Vibra is a registered trademark of Treasure Products.
032020B2
Adjustments
Sensitivity
You can adjust how sensitive the Vibra-Phone is to
the tones your detector generates. Set the Sensitivity
level so that you can feel a pulse of vibration each
time your detector detects an object, or each time
your detector generates a tone.
The sensitivity is adjusted by rotating the ‘Sensitivity’
knob. For maximum sensitivity, rotate the knob to
the full clockwise position.
For detectors with a ‘Threshold Sound’, adjust the
sensitivity up until you feel the vibration from the
threshold, then back it off until the vibration stops.
Pulse Width
Adjusting the Pulse Width will vary the length of time
a vibration lasts. This is how long the pulse of
vibration will be for each tone that your detector
generates.
If your detector has short sharp tones when a target
is detected, you may not feel them when they are
converted to vibration. To remedy this, you can
adjust the Pulse Width, or length of vibration, so that
you don’t miss these tones.
The Pulse Width adjustment is done by turning the
pot. Rotating the pot clockwise will shorten the
vibration. Rotating the pot counterclockwise will
lengthen the vibration.
Once you’ve adjusted the pot to your liking, you
should not have to change this adjustment again.
• • •
Product Care
•
Remember to turn the Sensitivity knob to the
OFF
position when not in use to conserve battery life.
•
When the Vibra-Phone is off there is no drain on
the battery. However, if stored for long periods of
time, we recommend removing the battery to prevent
damage to the unit due to a potential battery leak.
Other Equipment by Treasure Products, Inc.
Vibra-Tector
- Pulse Induction Metal Detector
Vibra-Probe
- Pinpointer Metal Detector
E-Z Swing -
Metal Detector Harness
VIBRA-PHONE 280 SPECIFICATIONS
•
Manufacturer:
Treasure Products, Inc.
•
Model:
Vibra-Phone 280 (Rev A)
•
Communication:
Vibration
•
Sensitivity:
Adjustable
•
Pulse Width:
Adjustable
•
Overall Length:
5 inches (13 cm)
•
Weight:
4 oz. (141 grams)
•
Power Source:
One standard 9 volt
•
9-volt Battery:
Included
•
Audio Cable 3’:
Included
•
Stereo & Mono Adapters:
Included
•
Mounting Strap:
Included
•
Warranty Period:
1 year
•
Origin:
Made in the USA
Note: This unit is not waterproof. Do not
submerge or expose to water.
Specifications and features are subject to
change without prior notification.
