Tre-d-eng Variled 1000 Mod.501B, Operation Manuals

Page: 5 / 12

Page | 4
POWER BOOST
The Dimmer has a Boost switch for extra lighting intensity. When BOOST is enabled you get the most
from your TRE-D LED light. When BOOST is disabled there is less power consumption and you get more
operating hours. This is important, especially for smaller batteries.
BICOLOR COOL WARM
We have full range of LED Lights. Bicolor, Cool and Warm Lights. With Bicolor light you can change the
color temperature from warm to cool by using our advanced dimmer. For cool or Warm lights you can
use the TRE-D color filters.
2 MODES
Dimmers of the Bicolor LED lights usually have 2 controllers. The first one controls the color temperature
and the second one the lighting intensity. Some other dimmers have the first controller to adjust the
intensity of the warm lighting and the second one to adjust the intensity of the cool lighting. We have
both modes in one dimmer! You can choose which mode you want to use with just a push of a button.
FLICKER FREE
Our LED Lights are flicker-free. We have used a Cinema slow motion camera and tests were made in all
steps of shutter speed up to 1/10000 and all steps of frame rate up to 800fps!
STABLE LIGHTING
We have used an advanced electronic circuit in order to protect the LED light from power drops. So,
even when the Voltage of the battery is dropping, the lighting intensity remains the same until the
battery runs out.
MOUNTS
We supply clamps in order to attach the power adapters and the dimmer on light stands. The LED light
body has a yoke metal base that is easily attached to a 16mm spigot.
1/4” THREADS
We have used 1/4” threads to most of our power adapters and our dimmer. So you can easily attach
them on tripods, mounts or brackets. TRE-D clamps are ideal for attaching power adapters and dimmers
on light stands.
3.5M CABLE
Most of the dimmers are placed in the light body, which makes the access to the controls impossible,
when a 3.5m light tripod is used. Our dimmer is placed on the cable which has 3.5m total length.
Measuring from the light body to the dimmer, cable length is 2m. So, the dimmer will be at 1.5m height
when a 3.5m tripod is used. TRE-D power supplier is equipped with an extra 1.5m cable.
BARNDOORS-SOFTBOXES
We build high quality 4-leaf barndoors and softboxes with metal mounting. They are attached directly
on the light body. Also we can supply diffuser, warm and cool acrylic filters for our LED lights.