No. 1201-T1018001 1/8
MS343-18001/MS343-18002
Rear Bumper Spoiler
Attaching and Handling Procedures
Thank you for buying TRD’s rear bumper spoiler, which is applicable to 86 car models.
This document describes procedures and notes for assembling and handling the above product.
Before attachment, be sure to read this document, in order to become familiar with attaching and
handling work.
Be sure to present this document to the customer.
List of product numbers and applicable cars
Product No.
Paint color
Remarks
MS343-18001-A0
Satin white pearl (37J)
MS343-18001-C0
Crystal black silica (D4S)
MS343-18002-00
No coat (treatment with primer)
These apply to all grades of Toyota 86
to be released in April 2012 and later.
Bill of materials
No.
Part name
Part No.
Qt.
Remarks
1)
Rear bumper spoiler
1
2)
Clip
4
3)
Tapping screw
4
M5 and 16 mm long
4)
J nut
4
M5
5)
Rubber washer
2
6)
Band clamp
82711-16820
1
7)
PAC primer
1
K-500
8)
Template
1
9)
Assembling and handling
procedures
1
This document
The following parts are included in only MS343-18002-00 (uncoated product).
No.
Part name
Part No.
Qt.
Remarks
10)
Molding
(1 each)
Black/gray, 2,370 mm long,
and supply No.: 76877-SP000
11)
Molding
1
Black and 650 mm long
12)
Tow hook cover
2
Finished by surfacer
13)
PAC primer
1
K-500
1)
2)
3)
4)
5)
6)
7)
8)
9)
Components included in only MS343-18002-00 (uncoated product)
10)
11)
12)
13)
Assemble this product after you register your car.
If you attach the spoiler before registration, you are required to deliver your
car to a factory for new inspection.
