SLASH 4x4 • 11
TRAXXAS TQ
i
RADIO & VELINEON POWER SYSTEM
Your model is equipped with the newest TQi 2.4GHz transmitter
with Traxxas Link
™
Model Memory. The transmitter has two
channels for controlling your throttle and steering. The receiver
inside the model has 5 output channels. Your model is equipped
with one servo and an electronic speed control.
MODEL WIRING DIAGRAM
to Motor
LED
EZ-Set Button
(On/Off Button)
Heat Sink
VXL-3s ELECTRONIC SPEED CONTROL
Traxxas High-Current
Connector (Male)
to Battery
Receiver cable
(RX wire)
Cooling Fan
Connector
(for optional use)
TRANSMITTER AND RECEIVER
Steering
Trim
Multi-Function
Knob
Throttle
Trigger
Throttle Neutral
Adjust
Steering Wheel
Power Switch
Battery Compartment
Set Button
Menu Button
Red/Green Status LED
see page 30 for more info
Link
Button
LED
Sensor Expansion
Port
**
V/T
- Voltage/Temp Sensor Port
**
RPM
- RPM Sensor Port**
BATT/
CH5
- Battery/Channel 5*
CH4
- Channel 4*
CH3
- Channel 3*
CH2
-
Speed Control
CH1
-
Steering Servo
CH1
- Channel 1*
* Not used ** Accessory sensor port for use with the Telemetry Expander Module
(see Traxxas.com and included materials for more information)
Traxxas High-Current
Connector (Male)
to Battery
Brushless Motor
(see sidebar for proper
motor wiring)
Channel 1
Steering Servo
Channel 2
Electronic Speed Control
Cooling Fan Connector
(for optional use)
Antenna
Motor Cap
** Accessory sensor port for use with the Telemetry Expander Module (see Traxxas.com and included materials for more information)
ESC/Motor Wiring Diagram
Velineon 3500 Specs
Type:
Sensorless brushless
RPM/volt:
3500 (10-turn)
Magnet type:
Ultra High-
Temperature Sintered
Neodymium
Connection type :
3.5mm bullet
Wire size:
12 Gauge
Max RPM:
50,000
Diameter:
36mm (1.42") (540 size)
Length:
55mm (2.165")
Weight:
262g (9.24oz)
