background image

TR A X X AS • 9

QUICK START: GETTING UP TO SPEED

The following guide is an overview of the procedures for getting your model running. Look for the Quick Start logo on the bottom 
corners of Quick Start pages.

     1.   Read the safety precautions on page 4

     8.   Detail your model • See page 10

For your own safety, understand where carelessness and misuse 
could lead to personal injury.

Apply other decals if desired.

     2.   Charge the battery pack • See page 13

     9.  Drive your model • See page 20

Fully charge the included battery pack. Charge your battery now  
so it will be ready when you finish the other setup procedures.

Driving tips and adjustments for your model.

     3.   Install batteries in the transmitter • See page 13

     10.  Maintain your model • See page 24

The transmitter requires 4 AA alkaline batteries (sold separately).

Follow these critical steps to maintain the performance 
of your model and keep it in excellent running condition.

     4.   Install the battery pack in the model • See page 14

Your model requires a fully charged battery pack.

     5.   Turn on the radio system • See page 15

Make a habit of turning the transmitter on first, and off last.

     6.   Check servo operation • See page 16

Make sure the steering servo is working correctly.

     7.   Range test the radio system • See page 16

Follow this procedure to make sure your radio system works properly 
at a distance and that there is no interference from outside sources.

The Quick Start Guide is 
not intended to replace the 
full operating instructions 
available in this manual. 
Please read this entire 
manual for complete 
instructions on the proper 
use and maintenance of 
your model.

Look for the Quick Start 
logo at the bottom of 
Quick Start pages.

Summary of Contents for Bandit VXL 24076
































Reviews: