background image

6 • TRX-4

• REMOVE flammable items and combustible materials from the 

charging area.

• DO NOT leave the charger and battery unattended while 

charging, discharging, or anytime the charger is ON with a battery 
connected. If there are any signs of a malfunction or in the event 
of an emergency, unplug the charger from the  power source and 
disconnect the battery from the charger.

• DO NOT operate the charger in a cluttered space, or place objects 

on top of the charger or battery.

• If any battery or battery cell is damaged in any way, DO NOT charge, 

discharge, or use the battery.

• Keep a Class D fire extinguisher nearby in case of fire.
• DO NOT disassemble, crush, short circuit, or expose the batteries to 

flame or other source of ignition. Toxic materials could be released. 
If eye or skin contact occurs, flush with water.

• If a battery gets hot to the touch during the charging process 

(temperature greater than 110°F / 43°C), immediately disconnect 
the battery from the charger and discontinue charging.

• Allow the battery pack to cool off between runs (before charging).
• ALWAYS unplug the charger and disconnect the battery when not 

in use. 

• ALWAYS unplug the battery from the electronic speed control when 

the model is not in use and when it is being stored or transported.

• DO NOT disassemble the charger.
• REMOVE the battery from your model or device before charging.
• DO NOT expose the charger to water or moisture.
• ALWAYS store battery packs safely out of the reach of children 

or pets. Children should always have adult supervision when 
charging and handling batteries.

• Nickel-Metal Hydride (NiMH) batteries must be recycled or 

disposed of properly.

• Always proceed with caution and use good common sense at all 

times.

(continued from previous page)

SAFETY PRECAUTIONS

Summary of Contents for 82096-4







































Reviews: