High-Voltage Power Amplifier Operation
Default Setting:
Low Beam Mode
High-Voltage Power Amplifier Mode Selection
Use the
Mode Select
button on the high-voltage power amplifier to toggle through the different lighting modes (from
Low Beam Mode
to
High Beam
Mode
to
Daytime Mode
).
A B C D
Connector
Channel Default Connection
Default Setting
A
1
Low Beam Headlights
On
2
High Beam Headlights
Off
B
3
Not used
N/A
4
Not used
N/A
C
5
Tail Lights
On
6
Brake Lights
On when braking
D
7
Reverse Lights
On when reversing
8
Not used
N/A
Connector
Channel Default Connection
Low Beam Mode
High Beam Mode
Daytime Mode
A
1
Front Low Beam Headlights
On
Off
Off
2
Front High Beam Headlights
Off
On
Off
B
3
Not used
N/A
N/A
N/A
4
Not used
N/A
N/A
N/A
C
5
Tail Lights
On
On
Off
6
Brake Lights
On when braking
On when braking
On when braking
D
7
Reverse Lights
On when reversing On when reversing On when reversing
8
Not used
N/A
N/A
N/A
Change the high-voltage power amplifier settings and gain access to
additional functions using the Traxxas Link App (available in the Apple
App Store
SM
or on Google Play™). The TQi transmitter with the Traxxas
Link Wireless Module (part #6511, sold separately) are required.
Mode Select
Button
This device complies with FCC Part 15 & IC RSS-210 rules subject to the following conditions: (1) This device may
not cause harmful interference, and (2) This device must accept all interference received, including interference
that may cause undesired operation.
App Store is a service mark of Apple Inc. Google Play is a trademark of Google Inc.
Front Light Bar Wiring routed to
High-Voltage Power Amplifier
Rear Light Bar Wiring/Long Extension Harness
installed on Rear Light Bar Mount
High-Voltage Power Amplifier with
Short Extension Harness installed
