www.traxontechnologies.com | www.osram.us/traxon
©2021 TRAXON TECHNOLOGIES - AN OSRAM BUSINESS. ALL RIGHTS RESERVED. TRAXON™, TX CONNECT®, ARE TRADEMARKS OF TRAXON TECHNOLOGIES. U.S. PATENTS, E.U. PATENTS, JAPAN PATENTS, OTHER PATENTS
PENDING. SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Installation Guide
V1.0 04/21
P. 12 of 30
2. INSTALLATION
Each ProPoint Vista 100W luminaire is shipped with a mounting bracket suitable for Surface/Pole
mount applications. This mounting plate is pre-installed at the mounting interface of the luminaire.
2.1 Surface Mount Installation
Required Tools
2x100W Model
14mm and 17mm Hex Key
3x100W Model
14mm and 17mm Hex Key
Surface Mount Installation
FIG.8: ProPoint Vista 100W Surface Mount Installation
Preparation
•
Remove the ProPoint Vista 100W luminaire from the packaging and place the unit on a level surface.
Bracket Preparation and Mounting
CAUTION
It is the installer’s responsibility to ensure that the mounting surface can handle the
static weight of the fixture as well as dynamic loading from environmental factors
such as wind and snow/ice buildup. The use of Grade 5 or higher hardware is
recommended.
•
Make sure that the bolts on the mounting surface align with the holes on the surface mount bracket
•
Install the luminaire to the mounting surface and secure using appropriate hardware (by others).
NOTICE
The ProPoint Luminaire should be installed with the power and data cables exiting
the housing directly down when the luminaire is mounted on a vertical surface. For
applications that require horizontal orientation of the power and data cables, the
installer shall apply RTV silicone to the cable gland entry points. The luminaire shall
not be installed with the power and data cabling oriented up.
