manualshive.com logo in svg

Traxon Flat DW, Installation Manual

Share
Download
Traxon Flat DW Installation Manual Download Page 7

www.traxontechnologies.com

©2021 TRAXON TECHNOLOGIES - AN OSRAM BUSINESS. ALL RIGHTS RESERVED. TRAXON™, TX CONNECT®, ARE TRADEMARKS OF TRAXON TECHNOLOGIES. U.S. PATENTS, E.U. 
PATENTS, JAPAN PATENTS, OTHER PATENTS PENDING. SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.

Installation Guide

06/21 V0.3

7 of 13

2.2.2  

Requirements Of Cable Bending And Twisting

Media Pixel Ribbon DMX Outdoor Flat and VB can only be bent among the vertical axis.

Media Pixel Ribbon DMX Outdoor HB can only be bent among the horizontal axis

Please take EXTRA precautions before bending Media Pixel Ribbon DMX and Connection 
Cables. They must be only bent in the direction specified. The Minimum Bending Radius 
150mm and the Non-Bendable Length of 20mm near the connector end or near the cable 
overmold MUST be adhered to.

Do not twist the Media Pixel Ribbon DMX in anyway.

NOTE: Water ingress incurred due to excess cable bending/twisting will not be under 
warranty by Traxon Technologies.

FIG.4:  Minimum Cable Bending and Non-Bendable Length Requirement (Flat and VB)

≥20mm

≥150mm

 

FIG.5:  Minimum Cable Bending and Non-Bendable Length Requirement (HB)

 

≥20mm

≥150mm

Summary of Contents for Flat DW














Reviews:

No comments

Brands by name

Popular brands

Load more brands