www.traxontechnologies.com
©2017 TRAXON TECHNOLOGIES - AN OSRAM BUSINESS. ALL RIGHTS RESERVED. TRAXON™, TX CONNECT®, ARE TRADEMARKS OF TRAXON TECHNOLOGIES. U.S. PATENTS, E.U.
PATENTS, JAPAN PATENTS, OTHER PATENTS PENDING. SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Installation Guide
03/17 V1.0
9 of 18
2.3 On-Site
Installation
•
DO NOT attempt installation in wet or severe weather conditions.
•
DO NOT leave and expose any Washer Allegro AC XB RGB / DWs or
power sources unconnected under wet/raining or snowing environment.
•
IP failure induced by stressed/damaged cables during or after installation
will not be under warranty by Traxon Technologies.
•
ALWAYS keep the cables protected from sharp objects and ensure no
damage is generated on the cable.
•
Failure to keep Washer Allegro AC XB RGB / DWs within the operating
temperature range and storage temperature range will void the product’s
warranty.
1. Connect AC source to starter cable through a junction box (not included).
FIG.7: Connect AC source to junction box
Wieland 3-pin female connector
(Not included)
AC In
Junction Box
(Not included)
2. Mount the Data Injector (not included) using screws.
FIG.8: Mounting Data Injector
AC In
Junction Box
(Not included)
3-pin female connector (Not included)