Basic Operations
2.
Basic Operations
2.1
Turn on STB
Press the Device’s Main
ό
Power
ύ
to turn on the unit.
If the STB is used for the first time, it will play the first
channel from the default Channel List. Otherwise, it will
play the last channel before being turned off.
?
Frequently Asked Question
Q: The power of my STB has been turned on and
not in Standby mode, but the TV screen shows
nothing:
A: Make sure the TV set has been set to the correct
video input (not the TV channels). For example, if you
have connected the unit with the Video1 input of the TV
set, the TV set has to be switched to Video1.
Q: The power of my STB has been turned on and
not in Standby mode, but the TV screen shows
nothing except “one ball with No Signal image”.
A: This means the channel you select has no signal.
There could be several causes:
1
The channel which you select is not in your
allocated satellite. The solution is to change the
channel.
2
The signal of current TV channel is too weak. Try
to switch to other strong-signal channels. If the
problems still exist, please consult your local
dealer or other professionals for technical service.
3
You have used the Dual LNB, and need
Modify
LNB Type
2.2 Standby
Mode:
1
Pressing Key
ό
Power
ύ
can enter the Standby
mode.
2
In Standby mode, pressing Key
ό
Power
ύ
again will
exit the standby mode.
3
Users can also disconnect the device’s main
power to end the Standby mode.
6
