Full Channel Search
Full Channel Search
You can automatically detect and save all TV, Radio channels:
Connect your STB to all peripheral devices, turn on the power of all
devices, select full band scan in installation menu, press start scan
function key and STB will automatically search all TV/Radio channels
and save them into channel list.
Basic Operation
Turn on STB
First, connect STB with power supply and correlative devices such as TV
set correctly and turn all of them on. If the STB is first used, it will play
the program of the first channel from the default channel list, otherwise,
STB will play the program of last channel before turning off
.
Information
In full screen, press [INFO] key, the parameters of the program you are
watching will be on shown.
Channel Up/Channel Down
In full screen, press [CH+/CH-] to change channel
.
Volume Control
In full screen, press [VOL+/VOL-] to adjust volume
.
Mute
To turn off the sound temporarily, press the mute button; to cancel mute,
press the mute button again.
Number
In full screen, use number key and press [OK] on the remote control unit
to change channels directly.
Pause
In playing mode, press [PAUSE] key to stop the picture. (Note: the sound
of the channel will still continue)
Press [PAUSE] key again, the picture will start again in real time.
Recall
Press [BACK] key to switch to the previous channel
.
-5-
