35
The receiver
Caution!
Check that connections of all equipment and the
antenna are proper before connecting the receiver to
the mains.
Insert the mains plugs of the connected equipment in
the mains socket and switch it on.
Switch on the AV channel of the TV set. If the receiver
is connected via Scart and the TV set recognizes the
switching voltage emitted by the receiver, it will switch
automatically to the AV mode. If the receiver is
connected via HDMI, it depends on the TV set if it
switches automatically to the AV channel or you have
to switch by yourself to the AV channel.
Insert the mains plug of the receiver in the mains
socket. Turn on the mains switch on the rear side of
the receiver. The device is in normal mode. The LED
displays the current channel.
The receiver is supplied with preset TV channels and can
be used directly. If you want to check if new channels are
available, initiate a scan for broadcasting stations. Read
the information further below for this purpose.
To get into standby mode, press the red key at
top right of the remote control. The current time is
displayed on the LED. The device consumes
approx. 2W only. Currently, this is a very low
value of power consumption.
28
