0
Attach Pad Housing
Place the pad (N) on top of the pad houisng (M) and be sure that the
screw holes line up underneath. Use 2x phillips screws (T) to fix the
pad in place, one one each side. To make this process easier, put the
screws in loosely and then tighten them once everything is in place.
(N)
Cl)
Attach Foam Tubes
Finally, attach the three foam tubes (S) to the ladder housing as
shown in the image below. The tubes have slits that allow you to slide
them onto the housing, you may have to apply a bit of force to get
the slits to open wide enough.
