1. Attach 3.5" HDD on top of the drive bay holder
2
Install 3.5" HDD to drive bay holder
2.
3.5" HDD
Drive bay holder
2. Install screw "A" (x4)
1
1. Attach compact flash to drive bay holder
2. Install screw "B" (x4)
Install compact flash to drive bay holder
3.
Drive bay holder
Compact flash
2
1
Install 2.5" HDDs to drive bay holder
4.
1. Attach 2.5" HDDs on top of the drive bay holder
2. Install screw "B" (x8)
2.5" HDD (x2)
Drive bay holder
2
1
2.5" HDD
Install drive bay holder with 2.5" HDDs to 1U chassis
5.
1. Slide each drive bay holder into lances as shown above
2. Install screw "C" (x2)
Note: view without front panel
Lances
1
2
Note: view without front panel
1. Place motherboards onto 1U chassis with the right I/O gasket
2. Install screw "C" (x8)
2
Lances
HDD
HDD
Install drive bay holder with 3.5" HDDs to 1U chassis
6.
Install motherboards to 1U chassis
7.
Case designs are subjected to change without prior notice.
Please visit www.Travla.com for more information to this product.
Copyright © 2003-2005 Casetronic Engineering Group.
1. Slide each drive bay holder into lances as shown above
2. Install screw "C" (x2)
2
Motherboards
1
1
