GreenSmart™ Remote – Export Version
SKU 99300699 (NG) SKU 99300698 (LP)
Page 8 of 15
9/25/09 - 17601590
© Travis Industries, Inc.
16
Pull the “RECEIVER” connector through the control panel and attach to the receiver (see Figure
21). Then attach the receiver to the control panel with the two #8 machine screws (see Figure 22).
Figure 21
Figure 22
17
Place batteries into the receiver and transmitter (see Figure 23). Calibrate the receiver to the
transmitter (see Figure 24 - use a paperclip to press the “PRG” button, let it beep, then press any
button on the transmitter – the receiver should beep 5 times – see the operating instructions for
further details).
Figure 23
Figure 24
18
Place the receiver coverplate (and switch) over the receiver (see Figure 25) and attach with the
two screws included with the receiver (see Figure 26)
Figure 25
Figure 26
