8
Installation (for qualified installers only)
© Travis Industries
4120228
100-01285_000
Additional Items Required
•
If using LP (propane) a conversion kit is required (sku 94400999 – GSR Stepper Motor Kit)
•
Faceplate
•
Chimney Liner and Termination Kit
•
Gas Line Equipment
•
This Insert Requires a Burner Kit and Media (logs/stones)
This fireplace is shipped without a burner. This allows the fireplace to be configured in unique
designs. See the table below to verify you have all of the items required.
Burner Style EmberFyre™
Burner
96900102
DancingFyre™ Burner
96900103
Media
Logs Included w Burner
Driftwood Log Set (sku 94500548)
Fyre-Stone Stone Set (sku 94700732)
Log Set (sku 94400991)
Stone Set (sku 94700729)
Items Packed with the Face
•
Face with attachment hardware (Note: use the cove covers included with the heater)
•
Face Installation Instructions
Order of Installation
1
If the heater is to use propane, install the propane conversion kit (see page 42).
2
Install gas line into the fireplace (do not connect to unit).
3
Position the heater and connect the electrical line.
4
Connect the gas line and gas vent to the appliance.
5
Install the optional surround panels and trim.
6
Install the burner and media (logs and stones).
7
Follow the instructions under "Finalizing the Installation" on page 24.
