4237 EG - Oak & Birch Log Set
(Birch - sku# 94500982) (Oak - sku# 94500983).
Page 3 of 10
17602208 —9/15/2021
© Travis Industries, Inc.
Log Set Installation
The logs are fragile, especially after exposure to heat.
NOTE
: The fireplace should be in place, with the gas line and vent attached and the firebacks installed (see
owner’s manual for further details).
1. Install the Ember-Glo™ glass over the perforated portion of the media tray. Place a thick layer of the
ember glass over the perforations making sure to cover all of the holes completely.
2. Lightly dress the ember glass with the black touch-up paint provided. Check the appearance with
the lights on and add additional paint, as needed, for a realistic glowing ember appearance.
WARNING
Make sure the pilot and burner are off before using paint in the firebox.
NOTE:
If power is supplied to the fireplace it can help to turn the lights on while painting so you can determine an
appropriate amount of paint for a realistic ember appearance.
NOTE:
We recommend that you use a piece of paper, cardboard as a shield to mask the log grate and burner
from overspray (see below).
NOTE:
If power is supplied, turn the rheostat up until the embers have a realistic and aesthetically pleasing
appearance. Use the remote to turn the Ember-Glo™ lights on and off.
Scan this code with a QR
reader on your cell phone to
watch a video of Ember-Glo™
glass setup.
http://vimeo.com/289322734
