564 HO Ember-Fyre Burner and Log Set
Installation Instructions
(sku 96900116)
Page 3 of 9
17601655 — 11/14/12
© Travis Industries, Inc.
4. Install the firebacks as shown below.
Place the rear fireback in place.
Remove the clip located on the
firebox ceiling near the front (both
sides). The side fireback clip has
a keyhole slot. It can be removed
by loosening the screw and
sliding the clip out.
Place the side firebacks
in place.
a
c
Replace the clips removed in
firebacks.
e
d
Place the fireback
so the vertical grout line on
the edge of the fireback is
facing the rear.
b
1/4” Nutdriver
NOTE:
Place the floor firebacks in place.
step “a” to secure the side
