564 HO Ember-Fyre Burner and Log Set
Installation Instructions
(sku 96900116)
Page 1 of 9
17601655 — 11/14/12
© Travis Industries, Inc.
Packing List
Burner
Assembly
Grate
Assembly
Log Set
Intake
Restrictor
Air Deflectors, NG and LP
(2) Andiron Clips
(2) Rivets for burner
Burner Support Bracket
Bag of embers
Installation Tips
If using propane (LP), convert the appliance before installing the burner.
Make sure to have the firebacks for the appliance on hand. They will be
installed during burner installation.
Installation Warnings
The logs are fragile, especially after being exposed to heat.
Make sure the gas control valve is OFF and the heater is cool before
servicing.
Failure to position the parts in accordance with these diagrams or failure to
use only parts specifically approved with this appliance may result in
property damage or personal injury.
The burner must be correctly positioned before installing the logs. Make sure
the burner is fully seated and the pilot is properly aligned.
Andiron Clips
NOTE: Two andiron clips are included for
those installations using andirons. See the
directions to the right to install.
5/32 Hex
Wrench
11/32" Nutdriver
a
b
c
