Travelmate P214-52, Manual

Page: 32 / 99

Machine Maintenance Procedures 1-32
LCD Module Removal
0
Prerequisite:
Battery Pack Removal
1. Disconnect the WLAN antenna cables (A) from the WLAN module connectors
( Figure 1-28 ).
2. Unroute the WLAN antenna cables from the guides on the top assembly
( Figure 1-28 ).
3. Disconnect the eDP cable from the mainboard connector (B) ( Figure 1-28 ).
Figure 1-28. LCD Module Removal
4. Remove four (4) screws securing the LCD module in place ( Figure 1-29 ).
Figure 1-29. LCD Module Removal
A
B