T
B-4P
4P-00001
INSTALLING STRINGS:
The TB-4P uses standard, ball-end bass strings. (Factory installed D’Addario EXL-165.) No special tools are
required for string changes.
The In-Body™ tuners on your Traveler Guitar operate just like the tuners on a standard guitar. We recommend
changing the strings two at a time. Removing all the strings at once may cause some of the components that
are held in place by string tension to come loose. First remove the old E, and A strings, and then install the
new strings in their places. Repeat this process on the D and G strings.
To change strings, thread the string through the correct hole in the endcap and wrap the string around the
string roller to the proper tuning machine hole. Leave approximately 2
½
inches of slack in the string to allow
3 to 4 wraps on the tuner. Bend the string to anchor it in place in order to hold the string after it is fed through
the tuner. Over-wrapping or under-wrapping the string around the tuning machine post may cause tuning
problems.
TUNING:
Hold the guitar in playing position and tune the strings as normal. Tuning the tuning machine in a clockwise
motion raises the pitch.
STRINGING AND TUNING STREAMLINE SYSTEMS
travelerguitar.com
Rear
Front
E
A
D
G
E
A
D
G
