Requires 9-volt battery for operation.
Note: Leaving a guitar cable or a set of headphones plugged into the guitar
will drain battery.
Escape EG-1
This preamp/headphone amp is designed specifically for the Traveler
Escape EG-1 by Pocket Rock-It®. This system utilizes a standard volume
and tone knob, and a three-way switch. This switch has three labeled
positions: Off (headphone effects off), Clean,
and Distotion. The 1/8 inch jack on your guitar
is to be utilized only for headphones.
Your headphone effects can be used through
a traditional amplifier if you so choose. Simply
plug your guitar into an amp using the ¼ inch
output jack and switch the headphone amp to
the desired setting; either clean or distortion.
Requires 9-volt battery for operation.
Note: Even when the guitar is unplugged, if the switch for your headphone
amp is left in either the clean or distortion position, it will be draining
battery power. Please turn the switch to the bypass/off position when not in
use to preserve the life of the battery.
9
