TRAPP WM-350, Instruction Manual

Page: 19 / 32

ENGLISH
19
www.trapp.com.br
Warning!
Whenever cleaning or maintaining the
lawn mower, make sure the motor is off
and the blade has come to a stop. Unplug
the extension cord.
The blade keeps rotating for a while
after the motor is switched off.
When mowing the grass, keep the power
supply cord behind the lawn mower.
When starting the lawn mower, after having
read all the instructions, keep your feet away
from the mower base.
Always keep the mower base grass exit to the
grass catcher unobstructed.
Neither lift nor carry the mower when the
motor is on.
Keep all nuts and screws tighten to make sure
the lawn mower is in usage conditions. After
mowing the grass, remove all the grass from
the base, both in the upper and lower parts.
Inspect and check the power cable and never
repair the wire with electrical tape. If the
cable is damaged, it must be replaced by an
Authorized Service from Trapp, to avoid the
risk of accidents.
After mowing the grass, remove all the grass from
the base, both in the upper and lower parts.
Replace worn or damaged parts for safety.
Never use a water jet to clean the lawn
mower. Clean it with a sponge or cloth soaked
in neutral detergent.
Have extreme caution when reversing or
pulling the machine towards you.
Start the motor with the cutting blade free
and wait for the motor to reach the ideal
rotation. Do not start the mower directly on
the grass.
Recommendations on use, type and
maximum length of extension cord to
be used (pg. 24) (cords follow Standard
ABNT NBR NM 60335-1, clause 25.7).
Maintenance and storage:
O
Keep all nuts, bolts and screws tight to be
sure that the equipment is in safe operating
condition.
O
Inspect the lawn recipient bag frequently
for signs of wear or deterioration.
O
Replace worn or damaged parts for safety.
O
With rotary mowers, make sure that only
cutting original replacement parts are used.
Double Insulation
TRAPP Lawn Mowers are classified as Protection
Class II - Double or Reinforced Insulation.
Manufacturing follows a series of constructive
requirements such as standardized drive keys,
cords and motors, flow distances and gap
between the energized parts. The materials
used meet safety requirements of household
appliances and similar products by INMETRO,
Ordinance 371. Despite that double insulation,
the safety precautions described in this manual
shall be followed.
Electric equipment constructed with this
insulation system do not require the use of a
ground wire.
Notice:
The double insulation does not substitute
the precautions that have to be taken when using
the lawn mower. It is an additional safety feature
against accidents that can be caused by an
insulation system failure of the lawn mower.